Konferenzen
-
A. Gontarz, N. Jufer, J. Bathelt, L. Weiss, K. Wegener, Determination and Evaluation of CO2 as a Sustainable Performance Measure on the Basis of a Typical Lathe, 1st International Conference on Sustainable Intelligent Manufacturing, 2011, Leiria, Portugal, ISBN 978-989-8481-03-0, Seiten 203--210, [BibTeX][Abstract]
-
D. Politze, J. Bathelt, N. Jufer, A. Kunz, A Survey on Stakeholders and Requirements for a new Factory Planning Approach, NordDesign 2010, 2010, Göteborg, Schweden, Seiten 447--454, [BibTeX][Abstract]
-
J. Pandremenos, K. Georgoulias, G. Chryssolouris, N. Jufer, J. Bathelt, A shoe design support module towards Mass Customization, 16th International Conference on Concurrent Enterprising, 2010, Lugano, Schweiz, [BibTeX][Abstract]
-
N. Jufer, J. Daaboul, J. Bathelt, D. Politze, F. Laroche, A. Bernard, A. Kunz, Performance Factory in the Context of Mass Customization, 16th International Conference on Concurrent Enterprising, 2010, Lugano, Schweiz, [BibTeX][Abstract][Paper]
-
D. Politze, N. Jufer, J. Bathelt, A. Kunz, K. Wegener, AMOR – An Agent for Assisting Monitoring, Optimization and (Re-)Design in Factory Design, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Österreich, ISBN 978-3-7083-0686-5, Seiten 761--768, [BibTeX][Abstract][Paper]
-
N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 209--214, [BibTeX][Abstract][Paper]
-
D. Politze, J. Bathelt, M. Reinhard, N. Jufer, A. Kunz, Interfacing Product Development and Factory Planning - Towards a Unified Life Cycle Management, 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 334--339, [BibTeX][Abstract][Paper]
-
J. Bathelt, D. Politze, N. Jufer, A. Jönsson, A. Kunz, Factory of the Future Enabled by the Virtual Factory Framework (VFF), 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 203--208, [BibTeX][Abstract][Paper]
-
N. Jufer, J. Bathelt, A. Kunz, M. Dürst, Product and Production Configuration Method – enhancing the customer driven value chain by the cognitive dimension, International Conference on Concurrent Enterprising, 2009, Leiden, Niederlande, [BibTeX][Abstract][Paper][Slides]
Journals
-
V. Gorobets, V. Holzwarth, C. Hirt, N. Jufer, A. Kunz, A VR-based Approach in Conducting MTM for Manual Workplaces, The International Journal of Advanced Manufacturing Technology, 2021, Moscow, Russland, ISSN 0268-3768, DOI 10.1007/s00170-021-07260-7, Seiten 2501--2510, [BibTeX][Abstract][Paper]
-
N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, Estonian Journal of Engineering, 2012, Tallinn, Estland, ISBN 1736-6038, ISSN 1736-7522, DOI 10.3176/eng.2012.1.04, Band 18, Nr. 1, Seiten 42--57, [BibTeX][Abstract][Paper]
Abgeschlossene Arbeiten
-
Hagen Klippel, Noëlle Jufer, Masterarbeit, Erarbeitung und Umsetzung eines Change Management Konzepts für Lean Management, 2016 [Ausschreibung]
-
Simon Züst, Noëlle Jufer, Peter Acél, Masterarbeit, Modellierung und Optimierung einer Produktion bei Siemens Zug, 2016 [Ausschreibung]
-
Simon Züst, Noëlle Jufer, Peter Acél, Semesterarbeit, Modellierung und Evaluation des Logistikkonzeptes auf Basis eines Milkruns am Beispiel Factory One, 2015 [Ausschreibung]
-
Simon Züst, Noëlle Jufer, Peter Acél, Semesterarbeit, Modellierung und Evaluation des Logistikkonzeptes auf Basis eines flexiblen Transportsystems am Beispiel Factory One, 2015 [Ausschreibung]
-
Daniel Politze, Jens Bathelt, Noëlle Jufer, Semesterarbeit, Consistent Goal-Modeling in the Early Phases of Factory Planning, 2011 [Ausschreibung]
-
Daniel Politze, Jens Bathelt, Noëlle Jufer, Bachelorarbeit, Network-based Analysis for KPI Identification, 2011 [Ausschreibung]
-
Jens Bathelt, Noëlle Jufer, Adam M. Gontarz, Anders, Nova GmbH Jönsson, Semesterarbeit, Sustainability in Production - Performance Indicators, Monitoring & Assessment, 2011 [Ausschreibung]
-
Noëlle Jufer, Andreas Kunz, Adrian Steinemann, Philipp Ackermann, Philippe Burkhalter, Bachelorarbeit, Layout Tool zur frühen Fabrikplanung, 2011 [Ausschreibung]
-
Noëlle Jufer, Marcel Schmid, Jens Bathelt, Semesterarbeit, Implementation of interrelated product- and process platforms in a PDM/PLM System, 2010 [Ausschreibung]
-
Daniel Politze, Noëlle Jufer, Jens Bathelt, Masterarbeit, Requirements Management for the Factory of the Future - Analysis, Strategy and Tool Support, 2010 [Ausschreibung]
-
Daniel Politze, Noëlle Jufer, Jens Bathelt, Masterarbeit, Investment Planning for the Factory of the Future - Analysis, Strategy and Tool Support, 2010 [Ausschreibung]
-
Daniel Politze, Noëlle Jufer, Andreas Kunz, Bachelorarbeit, Cross-domain analysis/modeling of performance indicators for monitoring the factory of the future, 2010 [Ausschreibung]
-
Noëlle Jufer, Philippe Burkhalter, Philipp Ackermann, Bachelorarbeit, Layout-Tool zur Fabrikplanung, 2010 [Ausschreibung]
-
Noëlle Jufer, Jens Bathelt, Thomas Duenser, Bachelorarbeit, Parameter-based factory design, 2010 [Ausschreibung]
-
Noëlle Jufer, Jens Bathelt, Adrian Steinemann, Bachelorarbeit, Performance Indicator Calculation Method (PICM) in Customer Driven Design and Production, 2010 [Ausschreibung]
-
Noëlle Jufer, Philippe Burkhalter, Philipp Ackermann, Bachelorarbeit, Konzept zur Fabrikflächenberechnung, 2010 [Ausschreibung]
-
Noëlle Jufer, Jens Bathelt, Pascal Somm, Masterarbeit, Optimierung Verpackungsprozess bei der ABB Turbo Systems AG, 2010 [Ausschreibung]
-
Anders Jönsson, Noëlle Jufer, Jens Bathelt, Masterarbeit, Impact of the paradigm shift “Factory as Product” on product and factory design, 2009 [Ausschreibung]
-
Noëlle Jufer, Jens Bathelt, Semesterarbeit, Compatibility and Configuration Matrix System (CCMS) in Customer Driven Design and Production, 2009 [Ausschreibung]
|
